| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Axial Piston Variable Pump Type A15VSO A15VLO series 10
A15vso A15vso110 A15vso145 A15vso175 A15vso210 A15vso280 Pump Open circuit
Features:
Variable axial piston pump of swashplate design for hydrostatic drives in open circuit
For use preferably in stationary applications
The flow is proportional to the drive speed and displacement.
The flow can be infinitely varied by adjusting the swashplate angle
The pump can work either self-priming or with a charge pump
A wide range of highly adaptable control devices with different control and regulating functions for stationary applications.
100% mooring function possible depending on specific controller (swivel mode, operation as a motor)
The universal through drive is suitable for adding gear pumps and axial piston pumps up to the same size, i.e. 100% through drive
Compact design
High efficiency
High power density
Low noise level
Details regarding the choice of hydraulic fluid
The correct choice of hydraulic fluid requires knowledge of the operating temperature in relation to the ambient temperature: in a closed circuit the circuit temperature. The hydraulic fluid should be chosen so that the operating viscosity in the operating temperature range is within the optimum range - the shaded area of the selection diagram. We recommended that the higher viscosity class be selected in each case. Example: At an ambient temperature of X °C an operating temperature of 60 °C is set. In the optimum operating viscosity range (shaded area) this corresponds to the viscosity classes VG 46 or VG 68; to be selected: VG 68. Please note: The case drain temperature, which is affected by pressure and speed, is always higher than the circuit temperature. At no point in the system may the temperature be higher than 115 °C. If the above conditions cannot be maintained due to extreme operating parameters, please consult us.
){kind=link}