| After-sales Service: | 1 Year |
|---|---|
| Warranty: | 1 Year |
| Structure: | Axial Plunger Pump |
| Cylinder Number: | Multi Cylinder |
| Drive Mode: | Hydraulic Driven Reciprocating Pump |
| Pump Shaft Position: | Horizontal |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
We produce 66179683 2659611519 3222323673 3217955410 3217955418 3222326563 3217955413 2659610623 3222323209 2659604792 2300000951 3217882350 5541008400 5540135500 5537107700 5112302112 5112287734 3217882300 3217882240 2659609883 1452189-R 2659607821 Epiroc L8 / L6 282 Boomer 282 Boomer Smartroc D65/L8/L6 L2D MT1020 MT1020 ST 3,5 Boomer 282 M2D Boomer 282 L2D/M2D T3W Drill Rig 3217903420 3222320974 3217955413 Atlas Copco Epiroc gear pump and hydraulic gear motor
Details regarding the choice of hydraulic fluid The correct choice of hydraulic fluid requires knowledge of the operating temperature in relation to the ambient temperature: in a closed circuit the circuit temperature. The hydraulic fluid should be chosen so that the operating viscosity in the operating temperature range is within the optimum range - the shaded area of the selection diagram. We recommended that the higher viscosity class be selected in each case. Example: At an ambient temperature of X °C an operating temperature of 60 °C is set. In the optimum operating viscosity range (shaded area) this corresponds to the viscosity classes VG 46 or VG 68; to be selected: VG 68. Please note: The case drain temperature, which is affected by pressure and speed, is always higher than the circuit temperature. At no point in the system may the temperature be higher than 115 °C. If the above conditions cannot be maintained due to extreme operating parameters, please consult us.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}