Sauer 82628304 223057 233052 82628305 3126707 3230893 3212263 3187509 3249061 3191543 3585901 Sundstrand Hydro-Transmission Hydraulic Motor

• Customization: Available
• After-sales Service: 1 Year
• Warranty: 1 Year
• Model NO.: 82628304 223057 233052 82628305
• Cylinder Number: Multi Cylinder
• Drive Mode: Hydraulic Driven Reciprocating Pump
• Power: Hydraulic
• Brand: Sauer
• Transport Package: Plywood Case
• Specification: 45*38*36
• Trademark: Hydvic
• Origin: Original or China
• HS Code: 8412291000
• Production Capacity: 50 Pieces/Week

Product Description

Sauer 82628304 223057 233052 82628305 3126707 3230893 3212263 3187509 3249061 3191543 3585901 sundstrand Hydro-transmission Hydraulic Motor 
Sauer Sundstrand SMF Hydraulic Axial Piston Concrete Motor MF2 MF20 MF21 MF22 MF23 MF24 MF25 MF26 MF27 with swashplate construction are of swash plate construction with preset displacement. and are intendent for closed circuit operation. The output speed is propor tional to the flow rate of the input fluid. The output torque is proportional to the differential between high and low pressure sides of the fluid circuit. The direction of motor (output) shaft rotation depends upon which port the fluid enters the motor.
technical performance data below:

Description	Dimensions	Frame size
Max. displacement	cm3	MF-20	MF-21	MF-22	MF-23	MF-24
Max. flow	dm3 min-1	33.3	51.6	69.8	98	118.7
Displacement per revolution of the charge pump	cm3	12.3	12.3	18.03	18.8	32.8
Max. pressure	MPa	35
Nominal pressure	MPa	21
Max. pressure of control	MPa	3.5
Max. speed	min	3590	3100	2810	2590	2350
Min. speed	min	500
Nominal speed	min	1500

Sauer Danfos SMF Hydraulic Piston Cement Mixer Motor SMF21, SMF22, SMF23, SMF24
And Eaton HHD Concrete Mixer Heavy Duty Motor.
Details regarding the choice of hydraulic fluid     
The correct choice of hydraulic fluid requires knowledge of the operating temperature in relation to the ambient temperature: in a closed circuit the circuit temperature. The hydraulic fluid should be chosen so that the operating viscosity in the operating temperature range is within the optimum range - the shaded area of the selection diagram.  the higher viscosity class be selected in each case. i, e: At an ambient temperature of X °C an operating temperature of 60 °C is set. In the optimum operating viscosity range (shaded area) this corresponds to the viscosity classes VG46 or VG68; to be selected: VG65. and note: The case drain temperature, which is affected by pressure and speed, is always higher than the circuit temperature. At no point in the system may the temperature be higher than 100 °C. If the above conditions cannot be maintained due to extreme operating parameters, please consult us.