Hydraulic PMP Pmhp55 Pmhp72 Pmhp90 Pmhp110 Pmh P55 P72 P90 P110 Pump

• After-sales Service: 1 Year
• Warranty: 1 Year
• Structure: Axial Plunger Pump
• Cylinder Number: Multi Cylinder
• Drive Mode: Hydraulic Driven Reciprocating Pump
• Pump Shaft Position: Horizontal
• Model NO.: P55 P72 P90 P110
• Power: Hydraulic
• Radial Plunger Pump Type: Axial Flow
• Brand: New
• Transport Package: Plywood Case
• Specification: 35x36x42
• Trademark: hydvic
• Origin: China
• HS Code: 8413503190
• Production Capacity: 20 Pieces/Week

Product Description

Hydraulic Piston PMH P55 P72 P90 P110 PMP Industries pump

PMH high pressure axial piston pumps for closed loop are specifically designed to be used on heavy duty machines for traction and
auxiliary functions, providing efficiency and durability.
500 BAR TECHNOLOGY
The global structure of the transmission is designed to handle pressure and loads without deformation: in this way efficiency is
also maintained in high pressure working conditions.
Highlight
500 bar pressure technology, i.e. extremely solid pumps for the toughest applications and conditions.
Wide range of controllers from manual MS, to electric proportional EP, to specialcontrollers like MY, RE specifically designed or
special application.
Premium materials, tight tolerances and precision machining
On demand, PHM P feature an additional valve block to include flushing alve, by pass system, dead man valve, cut off valve.
Available controls.
MS,ProportionalManualControl.
EP, electricproportionalcontrol
With the electric proportional control (EP) the displacement of the pump is directly proportional to the input current applied to one of the two solenoids. The pump is fitted with a resetting device which automatically reset the control spool to central position if no control takes place. With the hydraulic proportional control (HP) the displacement of the pump is directly proportional to the pilot pressure applied to one of the two control pressure ports. The pump is fitted with a resetting device which automatically reset the control spool to central position if no control
takes place.

Details regarding the choice of hydraulic fluid     

The correct choice of hydraulic fluid requires knowledge of the operating temperature in relation to the ambient temperature: in a closed circuit the circuit temperature. The hydraulic fluid should be chosen so that the operating viscosity in the operating temperature range is within the optimum range (νopt) - the shaded area of the selection diagram. We recommended that the higher viscosity class be selected in each case. Example: At an ambient temperature of X °C an operating temperature of 60 °C is set. In the optimum operating viscosity range (νopt; shaded area) this corresponds to the viscosity classes VG 46 or VG 68; to be selected: VG 68. Please note: The case drain temperature, which is affected by pressure and speed, is always higher than the circuit temperature. At no point in the system may the temperature be higher than 115 °C. If the above conditions cannot be maintained due to extreme operating parameters, please consult us.