6e-5477 9t-4104 9t-2031 6e-6425 8I-0836 6e1279 6e-1279 Pve19 Pve21 Pve41 Pve Eaton Vickers Piston Pump

• After-sales Service: 1 Year
• Warranty: 1 Year
• Structure: Axial Plunger Pump
• Cylinder Number: Multi Cylinder
• Drive Mode: Hydraulic Driven Reciprocating Pump
• Pump Shaft Position: Horizontal
• Model NO.: Pve19 Pve21 Pve41
• Type: Radial
• Power: Hydraulic
• Straight Shaft Swashplate Piston Type: Pressureoil
• Radial Plunger Pump Type: Axial Flow
• Brand: Vickers
• Transport Package: Plywood Case
• Specification: 35x36x42
• Trademark: Hydvic
• Origin: Original or China
• HS Code: 8413503190
• Production Capacity: 20 Pieces/Week

Product Description

Hydraulic PVE PVM  and Pve12 Pve19 Pve21 Pve41 Eaton Vickers Piston pump and CAT 6E1279 6E-1279 6E-5477 9T-4104 9T-2031 6E-6425 8I-0836 pump
Details regarding the choice of hydraulic fluid   
The correct choice of hydraulic fluid requires knowledge of the operating temperature in relation to the ambient temperature: in a closed circuit the circuit temperature. The hydraulic fluid should be chosen so that the operating viscosity in the operating temperature range is within the optimum range - the shaded area of the selection diagram. We recommended that the higher viscosity class be selected in each case. Example: At an ambient temperature of X °C an operating temperature of 60 °C is set. In the optimum operating viscosity range (shaded area) this corresponds to the viscosity classes VG 46 or VG 68; to be selected: VG 68. Please note: The case drain temperature, which is affected by pressure and speed, is always higher than the circuit temperature. At no point in the system may the temperature be higher than 115 °C. If the above conditions cannot be maintained due to extreme operating parameters, please consult us.
Hydraulic fluid 
Before starting project planning, please refer to our data sheets RE 90220 (mineral oil), RE 90221 (environmentally acceptable hydraulic fluids) and RE 90223 (HF hydraulic fluids) for detailed information regarding the choice of hydraulic fluid and application conditions. The variable pump A4VG is unsuitable for operation with HFA, HFB and HFC. If HFD or environmentally acceptable hydraulic fluids are being used, the limitations regarding technical data and seals mentioned in RE 90221 and RE 90223 must be observed. When ordering, please indicate the used hydraulic fluid.