Mk Fg Series MKV-11 MKV-16 MKV-23 MKV-33 MKV-55 Variable Mitsubishi Hydraulic MKV Piston Pump

• After-sales Service: 1 Year
• Warranty: 1 Year
• Structure: Axial Plunger Pump
• Cylinder Number: Multi Cylinder
• Drive Mode: Hydraulic Driven Reciprocating Pump
• Pump Shaft Position: Horizontal
• Model NO.: Mkv-11 Mkv-16 Mkv-23 Mkv-33 Mkv-55
• Type: Radial
• Power: Hydraulic
• Straight Shaft Swashplate Piston Type: Pressureoil
• Radial Plunger Pump Type: Axial Flow
• Brand: Mitsubishi
• Transport Package: Plywood Case
• Specification: 85*88*120
• Trademark: Hydvic
• Origin: Original or China
• HS Code: 8413503190
• Production Capacity: 10 Pieces/Week

Product Description

MK FG MKV-11 MKV-16 MKV-23 MKV-33 MKV-55 Hydraulic Mitsubishi Piston Pump.
MKV-11H MKV-16H MKV-23H MKV-33H MKV-55H, etc.
MKV-23H-RF-A-C10-Q11
MKV-11ME MKV-16ME MKV-23ME MKV-33ME MKV-55ME
MKV-11NE MKV-16NE MKV-23NE MKV-33NE MKV-55NE 
Every unit in MKV Variable and MK fixed Pump Series is an developed by Mitsubishi completive technology and pump - manufacturing experience of nearly 60 years
 Mitsubishi engineering technology is based on fundamental research and elemental technique development and so itis able to cope with the rapid technical advancement of hydraulic machinery, so every unit of MK Pump Series has many features that me et today's needs.
Features
- Variable piston pump of swashplate design for hydrostatic closed circuit transmissions
- Flow is proportional to drive speed and displacement and is infinitely variable
- Output flow increases with the swivel angle of the swashplate from 0 to its maximum value
- Flow direction changes smoothly when the swashplate is moved through the neutral position
- A wide range of highly adaptable control devices is available for different control and regulating functions
- The pump is equipped with two pressure relief valves on the high pressure ports to protect the hydrostatic transmission
(pump and motor) from overload 
- The high-pressure relief valves also function as boost valves 
- The integrated boost pump acts as a feed and control oil pump
- The maximum boost pressure is limited by a built-in boost pressure relief valve
- The integral pressure cut-off is standard
Details regarding the choice of hydraulic fluid     
The correct choice of hydraulic fluid requires knowledge of the operating temperature in relation to the ambient temperature: in
a closed circuit the circuit temperature. The hydraulic fluid should be chosen so that the operating viscosity in the operating temperature range is within the optimum range (νopt.) - the shaded area of the selection diagram. We recommended that the higher viscosity class be selected in each case. Example: At an ambient temperature of X °C an operating temperature of 70 °C is set. In the optimum operating viscosity range (νopt.; shaded area) this corresponds to the viscosity classes VG 46 or VG 68; to be selected: VG 68. Please note: The case drain temperature, which is affected by pressure and speed, is always higher than the circuit temperature. At no point in the system may the temperature be higher than 112 °C. If the above conditions cannot be maintained due to extreme operating parameters, please consult us.
Hydraulic fluid   
Before starting project planning, please refer to our data sheets RE 90220 (mineral oil), RE90221 (environmentally acceptable hydraulic fluids) and RE90223 (HF hydraulic fluids) for detailed information regarding the choice of hydraulic fluid and application conditions. The variable pump A4VG is unsuitable for operation with HFA, HFB and HFC. If HFD or environmentally acceptable hydraulic fluids are being used, the limitations regarding technical data and seals mentioned in RE90221 & RE90223 must be observed. When ordering, please indicate the used hydraulic fluid.