| Customization: | Available |
|---|---|
| Certification: | ISO9001 |
| Casing Protection: | Protection Type |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
2657172926 2657117764 57117764 57172926 Atlas Copco Epiroc 718630 2658607696 2658607584 57209637 57110157 58607696 2657657660 Parker Denison Motor
M3b M3b1 M4c M4c1 M4sc M4sc1 M4d M4d1 M4sd M4sd1 M4e M4e1 M4dc M4dc1 M4sdc M3 M4
Fexed Parker Denison Vane Motor, the displacement range below:
009 012 018 027 036 024 027 031 043 055 067 075 062 074 088 102 113 128 138 153 185 214 Epiroc Atlas Copco Epiroc
218630 2658607696 2658607584 57209637 57110157 2657657660 58607696 SX58607584
The high starting torque efficiency of vane type motors makes them especially applicable in load hoist winch drives, swing drives and propulsion drives. This high starting torque efficiency allows the motor to start under high load without pressure overshoots, jerks and high instantaneous horsepower loads.
Vane motors begin life with high volumetric efficiency and maintain that efficiency throughout their operating life.
When operating at very low speeds on applications such as swing and load hoist drives, the vane motor exhibits very low torque ripple.
Details regarding the choice of hydraulic fluid
The correct choice of hydraulic fluid requires knowledge of the operating temperature in relation to the ambient temperature: in a closed circuit the circuit temperature. The hydraulic fluid should be chosen so that the operating viscosity in the operating temperature range is within the optimum range - the shaded area of the selection diagram. We recommended that the higher viscosity class be selected in each case. Example: At an ambient temperature of X °C an operating temperature of 60 °C is set. In the optimum operating viscosity range (shaded area) this corresponds to the viscosity classes VG 46 or VG 68; to be selected: VG 68. Please note: The case drain temperature, which is affected by pressure and speed, is always higher than the circuit temperature. At no point in the system may the temperature be higher than 115 °C. If the above conditions cannot be maintained due to extreme operating parameters, please consult us.
Hydraulic fluid
Before starting project planning, please refer to our data sheets RE 90220 (mineral oil), RE 90221 (environmentally acceptable hydraulic fluids) and RE 90223 (HF hydraulic fluids) for detailed information regarding the choice of hydraulic fluid and application conditions.
){kind=link}