| Certification: | ISO9001 |
|---|---|
| Number of Poles: | 8 |
| Speed: | High Speed |
| Condition: | New |
| Transport Package: | Plywood Case |
| Specification: | 35x36x42 |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
Closed Circuit Hydraulic PMP Industries MT55 MT130 MT180 PMH Motor
The PMH MT is a fixed displacement engine with axial pistons, it has a design of the oscillating plate specially designed for the oscillation of hydraulic excavators.
The PMH M motor is complete with:
-Valve for negative hydraulic brake
- Anti-cavitation valves
-Anti-shock valves
-Sliding valve for the anti-overturning function
MT55 MT130 MT180
PMH high pressure axial piston pumps for closed loop are specifically designed to be used on heavy duty machines for traction and
auxiliary functions, providing efficiency and durability.
500 BAR TECHNOLOGY
The global structure of the transmission is designed to handle pressure and loads without deformation: in this way efficiency is
also maintained in high pressure working conditions.
Highlight
500 bar pressure technology, i.e. extremely solid pumps for the toughest applications and conditions.
Wide range of controllers from manual MS, to electric proportional EP, to specialcontrollers like MY, RE specifically designed or
special application.
Premium materials, tight tolerances and precision machining
On demand, PHM P feature an additional valve block to include flushing alve, by pass system, dead man valve, cut off valve.
Available controls.
MS,ProportionalManualControl.
EP, electricproportionalcontrol
With the electric proportional control (EP) the displacement of the pump is directly proportional to the input current applied to one of the two solenoids. The pump is fitted with a resetting device which automatically reset the control spool to central position if no control takes place. With the hydraulic proportional control (HP) the displacement of the pump is directly proportional to the pilot pressure applied to one of the two control pressure ports. The pump is fitted with a resetting device which automatically reset the control spool to central position if no control
takes place.
Details regarding the choice of hydraulic fluid
The correct choice of hydraulic fluid requires knowledge of the operating temperature in relation to the ambient temperature: in a closed circuit the circuit temperature. The hydraulic fluid should be chosen so that the operating viscosity in the operating temperature range is within the optimum range (νopt) - the shaded area of the selection diagram. We recommended that the higher viscosity class be selected in each case. Example: At an ambient temperature of X °C an operating temperature of 60 °C is set. In the optimum operating viscosity range (νopt; shaded area) this corresponds to the viscosity classes VG 46 or VG 68; to be selected: VG 68. Please note: The case drain temperature, which is affected by pressure and speed, is always higher than the circuit temperature. At no point in the system may the temperature be higher than 115 °C. If the above conditions cannot be maintained due to extreme operating parameters, please consult us.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}