| Customization: | Available |
|---|---|
| Application: | Motor, Machinery, Marine, Agricultural Machinery |
| Type: | Planetary Gear Reducer |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Hydraulic Gear Reducer CW CT CR Oerlikon Fairfield Torque-Hub Planetary Gearbox Track Drive Final Drive Swing drive
Model: CW12 CW18 CT18 CT26 CT35 CT45 CT50
18HBA 18HPA W6C W7 W10C W12C3 W12D4 W16C3 W16D1 W20D1 W25D4 W40D2 W50D9 W80D1 W90 S6A S6C S7AB S10A S12A S16A S20A S25A S40A S50A1 S6B S7B S10B S12B2 S16B2 S20B1S25B4 S40B1 S50B1 S80B2 S90B1 W9T W12T W16T Fairfield Torque Hub
18HBA 18HPA W6 W7 W10 W12 W12D W16 W20 W25 W40 W50 W80 W90 S6 S7 S10 S12 S16 S20 S25 S40 S50 S25S40 S50 S80 S90 W9 W12 W16
This guide to Fairfield Torque-Hub® drive ratings and technical issues has been created to help you in selecting the proper Fairfield product for your application, as well as address the frequent questions that arise pertaining to available product options, features, and service issues. Our standard
Torque-Hub® drives are available with maximum output torque ratings from 12,000 in-lbs up to 4,000,000 in-lbs, with ratios from 3:1 to more than 1,100:1.
The Fairfield approach to drive system applications centers around the belief that thorough"front-end"application engineering practices, field testing and in-depth communication with our customers and their designers, we'll provide you with the best drive system. We pay particular attention to gear
and bearing life, and feel that it is extremely important that our customers know how we obtain our product ratings.
General Properties
The lubricant used in all Torque-Hub® drives should be a petroleum based, non-detergent gear fluid containing antioxidation, antifoaming and
extreme pressure additives. The lubricant should have a minimum viscosity index of 95 cst and maintain a minimum viscosity of 40 cst under
normal operating temperature conditions.
The following table lists the recommended viscosities for various ambient operating temperatures.
These recommendations are based on a temperature rise of 50º to 100º F at normal operating conditions.
Maintenance
Oil amounts for each series of Torque-Hub® drives are indicated in the appropriate series literature.
An initial oil change should be made after the first 50 hours of operation. Subsequent oil changes should be made at 1000 hour intervals or annually, whichever comes first. Oil temperature should be no higher than 160º to
180º for continuous operation, and no higher than 200º F for intermittent operation. For special applications, high horsepower, high speeds or wide temperature changes, please consult Fairfield Manufacturing.
Oil Fill Level
When the Torque-Hub® unit is mounted horizontally, the gearbox should be filled half-full of oil. Consult the appropriate series literature for
approximate fill volumes. Vertically mounted Torque-Hub® units may require special lubrication procedures. Please contact Fairfield Manufacturing
for vertically mounted applications.
){kind=link}