2638000 A11vg12 A11vg19 A11vg35 A11vg50 A11vg Pump

• After-sales Service: 1 Year
• Warranty: 1 Year
• Structure: Axial Plunger Pump
• Cylinder Number: Multi Cylinder
• Drive Mode: Hydraulic Driven Reciprocating Pump
• Pump Shaft Position: Horizontal
• Model NO.: A11vg12 A11vg19 A11vg35 A11vg50
• Type: Radial
• Power: Hydraulic
• Straight Shaft Swashplate Piston Type: Pressureoil
• Radial Plunger Pump Type: Axial Flow
• Brand: Rexroth
• Transport Package: Plywood Case
• Specification: 32*30*45
• Trademark: Hydvic
• Origin: Original or China
• HS Code: 8413503190
• Production Capacity: 50 Pieces/Week

Product Description

Brueninghaus Hydromatik variable 2638000 A11VG12 A11VG19 A11VG35 A11VG50 Pump, control device available DG, EZ, HD, MD, etc.
Features
- Variable axial piston pump of swashplate design for hydrostatic closed circuit transmissions
- Flow is proportional to drive speed and displacement and is infinitely variable
- Output flow increases with the swivel angle of the swashplate from 0 to its maximum value
- Flow direction changes smoothly when the swashplate is moved through the neutral position
- A wide range of highly adaptable control devices is available for different control and regulating functions
- The pump is equipped with two pressure relief valves on the high pressure ports to protect the hydrostatic transmission
(pump and motor) from overload 
- The high-pressure relief valves also function as boost valves 
- The integrated boost pump acts as a feed and control oil pump
- The maximum boost pressure is limited by a built-in boost pressure relief valve
- The integral pressure cut-off is standardDetails regarding the choice of hydraulic fluid:     The correct choice of hydraulic fluid requires knowledge of the operating temperature in relation to the ambient temperature: in a closed circuit the circuit temperature. The hydraulic fluid should be chosen so that the operating viscosity in the operating temperature range is within the optimum range - the shaded area of the selection diagram. We recommended that the higher viscosity class be selected in each case. Example: At an ambient temperature of X °C an operating temperature of 60 °C is set. In the optimum operating viscosity range (shaded area) this corresponds to the viscosity classes VG 46 or VG 68; to be selected: VG 68. Please note: The case drain temperature, which is affected by pressure and speed, is always higher than the circuit temperature. At no point in the system may the temperature be higher than 115 °C. If the above conditions cannot be maintained due to extreme operating parameters, please consult us.