Eaton Vickers Vtm42 Power Steering Vane Pump

• After-sales Service: 1 Year
• Warranty: 1 Year
• Type: Vane Pump
• Brand: Vickers
• Transport Package: Plywood Case
• Specification: 32*30*45
• Model NO.: VTM42
• Trademark: Hydvic
• Origin: Original or China
• HS Code: 8413603990
• Production Capacity: 100 Pieces/Week

Product Description

1. Eaton Vickers VTM42 power steering hydraulic vane pump :
2. Compact Power Source for Steering Assemblies
3. Integral Relief and Flow Control
4. Balanced Cartridge Design 
5. Technical data below: 
power steering pump VTM42 Vane Type mobile Application Series as follow:
-10- US Gallon Capacity
10 - 1.0 US gpm
15 - 1.5 US gpm
20 - 2.0 US gpm
40 - 4.0 US gpm
50 - 5.0 US gpm
60 - 6.0 US gpm
07 controlled flow (1500 rpm @ 100 psi)
07 - 0.7 US gpm 45 - 4.5 US gpm
15 - 1.5 US gpm 50 - 50 US gpm
20 - 2.0 US gpm 55 - 5.5 US gpm
25 - 2.5 US gpm 60 - 6.0 US gpm
30 - 3.0 US gpm 65 - 6.5 US gpm
35 - 3.5 US gpm 75 - 7.5 US gpm
40 - 4.0 US gpm
-02- relief valve setting
02 - 250 psi 12 - 1250 psi
03 - 300 psi 15 - 1500 psi
05 - 500 psi 17 - 1750 psi
07 - 750 psi 20 - 2000 psi
08 - 850 psi 35 - 3500 psi
10 - 1000 psi
(f) filter Parts (s) Inlet Screen ** reservoir or manifold
07 - 70 Cu. In. Reservoir
11 - 115 Cu. In. Reservoir.

Hydraulic fluid: Before starting project planning, please refer to our data sheets RE 90220 (mineral oil), RE 90221 (environmentally acceptable hydraulic fluids) and RE 90223 (HF hydraulic fluids) for detailed information regarding the choice of hydraulic fluid and application conditions. The correct choice of hydraulic fluid requires knowledge of the operating temperature in relation to the ambient temperature: in an open circuit the tank temperature. The hydraulic fluid should be chosen so that the operating viscosity in the operating temperature range is within the optimum range - the shaded area of the selection diagram. We recommended that the higher viscosity class be selected in each case. Example: At an ambient temperature of X°F (X°C) an operating temperature of 140°F (60°C) is set. In the optimum operating viscosity range (shaded area) this corresponds to the viscosity classes VG 46 or VG 68; to be selected: VG 68.Please note: The case drain temperature, which is affected by pressure and speed, is always higher than the tank temperature. At no point in the system may the temperature be higher than 240°C (115°C) for sizes 5 to 200 or 195°F (90°C) for sizes 250 to 500.If the above conditions cannot be maintained due to extreme operating parameters, we recommend flushing the case at port U (size 250 to 500).