289-4027 20r-0943 600-1597 87442128 67120-36901-71-a 67120-3690171 3716370m05 Al161044 90452269 A10vno63 A10vno Pump

• After-sales Service: 1 Year
• Warranty: 1 Year
• Structure: Axial Plunger Pump
• Cylinder Number: Multi Cylinder
• Drive Mode: Hydraulic Driven Reciprocating Pump
• Power: Hydraulic
• Model NO.: A10VNO28 A10VNO45 A10VNO63 A10VNO85
• Radial Plunger Pump Type: Axial Flow
• Brand: Rexroth
• Transport Package: Plywood Case
• Specification: 35x36x42
• Trademark: hydvic
• Origin: China
• HS Code: 8413503190
• Production Capacity: 10 Pieces/Week

Product Description

289-4027 20R-0943 600-1597 67120-36901-71 87442128 67120-36901-71-A 671203690171 3716370M05 AL161044 90452269 Hydraulic Axial Piston Variable Pump A10VNO28 A10VNO45 A10VNO63 A10VNO85 A10VNO Pump
Series 52 and 53
Sizes:  A10VNO28 A10VNO45 A10VNO63 A10VNO85
Nominal pressure 3050 psi (210 bar)
Maximum pressure 3600 psi (250 bar)

Hydraulic fluid
Before starting project planning, please refer to our data sheets RE 90220 (mineral oil), RE 90221 (environmentally acceptable hydraulic fluids) and RE 90223 (HF hydraulic fluids) for detailed information regarding the choice of hydraulic fluid and application conditions.The correct choice of hydraulic fluid requires knowledge of the operating temperature in relation to the ambient temperature: in an open circuit the tank temperature. The hydraulic fluid should be chosen so that the operating viscosity in the operating temperature range is within the optimum range - the shaded area of the selection diagram. We recommended that the higher viscosity class be selected in each case. Example: At an ambient temperature of X°F (X°C) an operating temperature of 140°F (60°C) is set. In the optimum operating viscosity range (shaded area) this corresponds to the viscosity classes VG 46 or VG 68; to be selected: VG 68.Please note: The case drain temperature, which is affected by pressure and speed, is always higher than the tank temperature. At no point in the system may the temperature be higher than 240°C (115°C) for sizes 5 to 200 or 195°F (90°C) for sizes 250 to 500.If the above conditions cannot be maintained due to extreme operating parameters, we recommend flushing the case at port U (size 250 to 500).